Microlaterolog
INPUTS	Use ft and Deg F Use m and Deg C
	Depth =	Total depth =
	Avg surface temp =	Bottomhole temp =
	Mud resistivity, Rm =	Rm measuring temp =
	Flushed zone resistivity, Rxo (ohmmeters) =
	Formation water resistivity (ohms), Rw =
	Deep Resistivity (ohm*meters), Rt =
	Define optional porosity model:	a = m =
	Rt from Laterolog Rt from Induction log
INPUT RMF?	Estimate Rmf Input Rmf
	Resistivity of mud filtrate, Rmf =
	Rmf measuring temperature =
RESULTS	Rt, corrected =	Temperature gradient = per 100 depth units
	Formation temperature =	Corrected Rm =
	Corrected Rmf =	Water saturation, Sw% =
	Porosity% from Archie model (limestone: a=1, m=2) =
	Porosity% from Humble model (sandstone: a=.62, m=2.15) =
	Porosity% from optional model =

RECORDING:

Depth,Total Depth,Avg Surf Temp,Bottomhole Temp,Rm,Rm Temp,Rxo,Rw,Rt,a,m,Input an Rmf?,Input Rmf,Input Rmf Temp,Rt corr,Temp Gradient,Formation Temp,Rm corr,Rmf corr,Sw%,Archie Porosity%,Humble Porosity%,Option Porosity%

When you finish your calculations,
select the recorded data, copy it,
and then paste it into a spreadsheet
as comma-delimited values to save it.